I am looking for anyone who wants to order these end caps for their bumpers.

I am only going to order enough for one run. I can't afford to over order and have these sitting on the shelf.

Price is dependent on quantity so the more I order, the better the price.

Also looking for a better picture to post if someone has one. So, if you have a better image, please post it.

So, who wants these and how many should I order?

I need to give a quantity by Monday, August 23rd

---

---

Bill: I have the prototype shop working on producing these parts. They would be universal and you have to carve the slots in the plastic to mate to the face of the bumper. The cost will depend on the number to be made. They will be vacuum formed ABS, black and have the same pebble grain as original. Could you pick out a picture of a coach showing the bumper and then if I can get some idea of the quantity I can get a price and then we can decide how to market them. A general post might be enough.

---

---

I'll take 8 pieces Bill, THANKS for supporting this!

Are the front and rear the same? I lost a right rear last month so I'd like at least one probably a couple if the fit and price is right.

I am going to order 6 up for myself. I never had them on my coach... Heck, I don't even know how they stick on. Anyone know how they are affixed to the coach?

I will only charge you what I pay for shipping, if you have your own UPS or Fed Ex customer number I'll use that. Otherwise they'll go out to you the way you request it.

UPS - US Postal Service - FedEx - Etc...

Mine had 2 small screws into the bumper top and bottom, tomorrow I will take pictures and post. I have 2 that I took off when I lost the other two in a huge AZ windstorm.

If I can help let me know.

Mine were the same front and rear.

I would be interested in (2) if they are not going to cost a fortune. I thought that the ones on my Breakaway were like a "sleeve" and pushed on over the end of the bumper. I need to check that out. I have one that needs replacing and would keep one as a spare.
I have found that sometimes when someone is doing this type of work and producing parts you cannot find, your pricing is also based on the costs of molds to make the parts. Unfortunately I have found that on limited automotive reproductions, this fee can be quite hefty. That is why the more you order the easier it is for the person to spread that fee over the quantity, therefore lowering the price.

Here are the ends. They glue to the bumper face, you trim for the profiles and any slots for the front bumper when it is moved outward to reach the generator or engine.



We will have a price estimate shortly.

And more:



holes that held the plastic piece front top



Holes that held the plastic piece front bottom



holes that held the plastic piece rear

I'd be interested in 5 at a reasonable price....2 each for front/back bumpers and one spare.

Think they'd be less than $20 each?

K&E

quote:

Originally posted by K&E:
Think they'd be less than $20 each?

I'll let you know what they say. I have no idea what to expect and if I try to fathom a guess I'll be wrong anyway.

It is always hard to guess how much profit someone thinks they can get.

We will take 2 as spares.
Don

Put me down for 2

I have 2 that are shredded and would like to replace those 2 for sure. I would say 4, but I might be putting a different style of bumper on the front, so I don't know if I would need them.

I know you are not able to provide pricing information as of yet, but it DOES kinda depend-on how much they would cost...

quote:

Originally posted by Medic37:
...but it DOES kinda depend-on how much they would cost...

I am painfully aware of that. Right now, I am only gauging interest.