Go to... | Start A New Topic | Search | Notify | Tools | Reply To This Topic |
9/10 |
I bought the front hellwig anti sway bar and rear bushing upgrade for my P30 chassis (#7162), but the brackets they supplied don't match up with the original holes. The front brackets they sent are 3.25" on center for the front and 3.5" for the rear. The original brackets and chassis are 3" centers in the front and 3.25" in the back. I don't see it mentioned in any other forum....has anyone else ran into this problem? I've left 6 messages with Hellwig to no avail. 1978 P32 w/454 s7708 2284 MC27 S-3 My dad makes me wanna Barth! | ||
|
"Host" of Barthmobile.com 1/19 |
Is it because you ordered the P30 parts instead of the P32 parts? I kind of remember someone having this issue too... Here is Ed doing this job without an issue. You can try to PM him Andrew. Jim and Tere did this job too. You might want to try this search.
| |||||||||||||||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |