Go to... | Start A New Topic | Search | Notify | Tools | Reply To This Topic |
"Host" of Barthmobile.com 1/19 |
At the risk of me sounding like a broken record... Pay to have it checked out properly, but be prepared to do it.
| |||||||||||||||
|
03/22 |
On my Breakaway, I had excessive wobble and the marks were indeed off but not by much. There is a spec in the Cummins manual. I did not have to remove anything to get the balancer off, just the 4 bolts in the middle of the damper and it was off! Torque when replacing and make sure it is 92 lb/ft torque! Ed 94 30' Breakaway #3864 30-BS-6B side entry New Cummins 5.9L, 375+ HP Allison 6 speed Spartan chassis K9DVC Tankless water heater | |||
|
1/11 |
I found mine easily look at the belt and see if it is perfectly strait with everything 1 the water pump 2 alternator 3 vibration damper .if it is not ripping up the belts and everything is in tacked check your tension arm. lenny lenny and judy 32', Regency, Cummins 8.3L, Spartan Chassis, 1992 Tag# 9112 0158 32RS 1B | |||
|
Powered by Social Strata | Page 1 2 3 |
Please Wait. Your request is being processed... |