I talked with Chris from MCR today...

Barthmobile Portal

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/284108802

12-08-2009, 06:39 PM

Patch1st

I talked with Chris from MCR today...

I ordered a new pitman arm and while at it I asked him to include a new sensor for the front brake fluid resivoir... He asked me If I had reset it ????? It is NOT an auto reset sensor, once it is tripped it must be manually reset.... Anyway I didnt buy one and will try resetting it first... Thank you Chris!!!

Patch1st
35' Regency
1985
MCC Chassis
8.2 Detroit Diesel
"Partly Cloudy"

12-09-2009, 12:19 AM

Bill N.Y.

You're not going to keep the procedure a "trade secret" are you?

˙ʎ˙u ןןıq- „ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ʇɐ ʞooן ɐ ƃuıʞɐʇ sı ǝɟıן oʇ ʇǝɹɔǝs ǝɥʇ„
	1990 Barth Regis Widebody 8908 0128 40RDS-C1 L-10 Cummins Allison MT647 Transmission Spartan Chassis	1991 Medical Lab Conversion 9102 3709 33S-12 Ford 460 MPFI C6 Transmission Oshkosh Chassis
Quick Link: Members Only Link To Send Me A Private Message

12-09-2009, 12:32 AM

Patch1st

Sorry.... There is a little button between the two wires about the size of an ink pen on the resivoir.... You need to push it in about 1/4" until it clicks to reset the sensor...

Patch1st
35' Regency
1985
MCC Chassis
8.2 Detroit Diesel
"Partly Cloudy"

12-09-2009, 01:04 PM

Carl Feren

Hi Patch1st, Can you please post a picture of the reset button?

Thank you.

Carl Feren

30'- 1992 Breakaway on Spartan Chassis
5.9L Cummins 190
Banks Powerpack
Allison 4 spd - 542B
9206-3805-30BS-6B
7KW Kohler Propane Genset