Forums    General Discussions    1998 Barth P30 A/C bypass valve
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
1998 Barth P30 A/C bypass valve
 Login now/Join our community
 
posted
we are having difficulty getting continuous cold air from the dash A/C. It starts cool and gets very warm quickly, 110 plus degrees. we are wondering if the control box for AC(slider) is not working and has anyone else had this problem? We are wondering if we should bypass the shut off valve.
 
Posts: 5 | Location: South Carolina | Member Since: 04-16-2018Reply With QuoteReport This Post
Official Barth Junkie
Supporting Member of Barthmobile.com 1/24
Picture of Steve VW
posted Hide Post
Based on the system in my old Regal there are several things I would check:
The AC and the heater use the same common plenum. The temp control on dash was a cable that runs to a water valve in the heater hoses. Be sure the cable is closing that valve when AC is used or the AC will have to fight the heat.

The remaining heater controls were used to select plenum flap controls including fresh/recirculate control. Make sure your system has working vacuum source.

Be sure your AC system has a full charge of refrigerant. Partial charge may cause intermittent operation.

Good luck. Mechanic


9708-M0037-37MM-01
"98" Monarch 37
Spartan MM, 6 spd Allison
Cummins 8.3 325+ hp
 
Posts: 5265 | Location: Kalkaska, MI | Member Since: 02-04-2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    General Discussions    1998 Barth P30 A/C bypass valve

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.