Barthmobile Portal
Heater Core

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/9331087061/m/1203901187

12-30-2013, 03:46 PM
Gloria Masters
Heater Core
Heater Core, under the dash on the passenger side is leaking water. I csn't figiure out how to get it out.Any help is much appreciated.
Thanks a lot. We're talking about my 91 Breakaway, 28 feet long.
Tom Maters
12-30-2013, 06:10 PM
Rusty
I haven't had mine out, but I have replaced the blower. The panel the inside grab handle is mounted on comes off (4 screws). You'll have to enlarge the opening to get the blower assembly out. IIRC, you'll then have access to the evaporator and the heater core.


Rusty


MilSpec AMG 6.5L TD 230HP; built-to-order by Peninsular Engines:  Hi-pop injectors, gear-driven camshaft, non-waste-gated, high-output turbo, 18:1 pistons.  Fuel economy increased by 15-20%, power, WOW!"StaRV II"

'94 28' Breakaway: MilSpec AMG 6.5L TD 230HP

Nelson and Chester, not-spoiled Golden Retrievers

Sometimes I think we're alone in the universe, and sometimes I think we're not.
In either case the idea is quite staggering.
- Arthur C. Clarke

It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields
12-30-2013, 08:36 PM
Tom and Julie
You can also work up under the headlight and remove it. It sits on a shelf welded to th front crossmember that the cap mounts to. The heater core is attached to the fan assembly so both must be removed.


1993 32' Regency Wide Body, 4 speed Allison Trans, Front Entry door, Diamond Plate aluminum roof &
1981 Euro 22' w Chevy 350 engine and TH 400 tranny