Forums    Swap Meet Central    Looking for ladder parts
Go to...
Start A New Topic
Search
Notify
Tools
Reply To This Topic
  
Looking for ladder parts
 Login now/Join our community
 
Picture of Fred & Cindy
posted
Well... after searching for new ladders I have decided to try repairing it myself. My ladder is old, of course, and I would like to keep it looking as original as possible. I am looking for 2 pieces of 18 inch ladder tubing and a couple of mounts. The mounts are about 5 inches long with each having a plate on bottom that rivets on to the coach. The mounts also have a plastic cap on the other end that raps half way around the ladder tubing for anchoring with a screw. Don't need any steps. If anyone has these older parts laying around I would be happy to buy them from you and pay for shipping. Thanks!


1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
 
Posts: 356 | Location: Missouri | Member Since: 06-24-2012Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 8/19
posted Hide Post
quote:
Originally posted by Fred & Cindy:
I am taking it in Tuesday to a small business owner for replacement of the latter. I have used him before and believe he will do a good job at a fair price.


I thought you were getting a new ladder built. Keep in mind you could also use electrical conduit for the frame. Conduit would be a little stronger also. You can buy the plastic plugs at most hardware stores.
 
Posts: 2475 | Location: Ohio | Member Since: 07-29-2012Reply With QuoteReport This Post
Picture of Fred & Cindy
posted Hide Post
Actually did have a new one put on but I don't like it. Its flimsy, more narrow, and just plain does not look right. I learned a hard lesson here. Would prefer original ladder parts if someone has any laying around.


1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
 
Posts: 356 | Location: Missouri | Member Since: 06-24-2012Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 03/22
posted Hide Post
I have a ladder that I removed some time ago. Unfortunately I am in Denver and will not be back until Sept 8.

When I get back I will check to see if the parts I have would work for you and advise.


Ed
94 30' Breakaway #3864
30-BS-6B side entry
New Cummins 5.9L, 375+ HP
Allison 6 speed
Spartan chassis
K9DVC
Tankless water heater
 
Posts: 2178 | Location: Los Gatos, CA | Member Since: 12-08-2005Reply With QuoteReport This Post
Supporting Member of Barthmobile.com 1/12
Picture of rp's barth
posted Hide Post
Can you send me a picture of what you need? I work at a dealership and we change ladders all the time and i have a few parts,


Richard & Robin
s7809 2539 MC27 FP3

  • 1979 27'
  • 454 Chevy
  • P-32 Chassis
 
Posts: 298 | Location: Deltona Flordia | Member Since: 08-18-2003Reply With QuoteReport This Post
Picture of Fred & Cindy
posted Hide Post
rp's barth... thanks, I will try sending you a personal message with photos.


1990 32' Regency, Wide Body
Spartan Chassis, 8.3 CTA Cummins
4 Speed Allison Trans
South Central Missouri
 
Posts: 356 | Location: Missouri | Member Since: 06-24-2012Reply With QuoteReport This Post
posted Hide Post
I just got a regency 1992 I need a ladder if anyone has one let me know 732-673-2284
 
Posts: 132 | Location: Ruskin flordia | Member Since: 08-06-2016Reply With QuoteReport This Post
  Powered by Social Strata  
 

    Forums    Swap Meet Central    Looking for ladder parts

This website is dedicated to the Barth Custom Coach, their owners and those who admire this American made, quality crafted, motor coach.
We are committed to the history, preservation and restoration of the Barth Custom Coach.