Go to... | Start A New Topic | Search | Notify | Tools | Reply To This Topic |
I recently purchased a 1974 Barth Motorhome 19 Feet long with a chevy 350 engine. Dash lights and gauges aren't working. I have climbed all over this thing trying to find the fuse panel. Can anyone tell me where it is located on this model? Thanks. Any help is appreciated. | |||
|
read this: https://www.barthmobile.com/eve...881059061#6881059061 _________________________ The 82 MCC {by Barth} is not an rv-- it is a Motor Coach!! | ||||
|
1/12 |
The Chassis Fuses Should Be Under The Dash Left(Drivers) Side and one will be marked inst if you can still Read It!! Richard & Robin
| ||||||
|
1974 Barth Motorhome 19 Feet info here: http://www.ownster.com/index.c...hTerm=1974+motorhome _________________________ The 82 MCC {by Barth} is not an rv-- it is a Motor Coach!! | ||||
|
2/16 Captain Doom |
If neither gages nor dash lights work, it could be the instrument panel connector on the back of the panel has come loose. Rusty "StaRV II" '94 28' Breakaway: MilSpec AMG 6.5L TD 230HP Nelson and Chester, not-spoiled Golden Retrievers Sometimes I think we're alone in the universe, and sometimes I think we're not. In either case the idea is quite staggering. - Arthur C. Clarke It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields | |||
|
Thank you, Rusty. I'll check under the dash. I still need to find the fuse panel just in case. | ||||
|
On my '77 21 foot fuses are below steering column. My panel lights and oil gauge don't work either. I'm still checking printed circuit board for breaks. I had the oil changed and now gauge points in the middle with engine on or off. I replaced 12 volt battery with 2 Trojans 6's. All measurements checked except height-now step has a 20 degree tilt! I plan on adding a 1 1/2 inch lip on the riser hinge side and use the old tread. One of these days we are gonna use it again! I enjoy these postings. Ted | ||||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |