I have a random wire that looks like it is suppose to go to the genius monitor switch. The switch spring returns to the middle and has the ability to be pressed up or down.



Does anyone know what this wire may be and where it should be hooked up at?

Thanks

Rodney

What os a Genius Monitor? Nothing named that in our 1993 Regency though we do have a monitor panel above the door that provides info on tank levels, patio and street side lighting and a switch to turn on the 12v pump and Auto Fill. Strangely the pump
light only comes on when the water pump system is running, not when energized.

We have an Energenius 3200 inverter in the elect. compatment under the foot of the bed.
There is a push on/off switch above the entry door for it, just to the right of the monitor and contol panel for water pump, water heater, auto fill, patio lights, water and waste tanks etc.
Is that the panel you are into? if so, it may go there.
Don

This is my monitor panel above the entry door.



This is the panel under the bed in the electrical compartment. 3200 model.



I miss spoke in my first post about the switch operations. It only spring returns to the down position. You can push it up where it is labeled "ENER" and then it springs back down to the "GENIUS" position.