Is there a way to convert the wiper arms over to a standard wiper blade? I have a 1986 on the P30 and my blades have the hole in them for the screw and nut that holds them on. No one in my town has them and I was wondering if there is a way to convert them over to a standard type arrangement or should I just order more than a few in case I need on on the road. Thanks

Some discussion here:

https://www.barthmobile.com/eve...503968067#4503968067

Good luck

Thank you very much

I went to commercial truck repair to get my replacements. Try going to a local truck repair dealer. Many old trucks have this style.

---

---

If the rubber blade is not damaged, try wiping the blade off with acetone.

The Trico blades seem hard to find.
The Anco Model ANC 52 20 are lighter duty but available for under $10 on Ebay.

I get mine at the local auto parts store.

Gary, do you have a part number ?

quote:

Originally posted by Paul And Jaime:
Gary, do you have a part number ?

I would like to get that part # also or what folks are using today? Still Trico and/or Napa or ?

I did check on all the older threads on this topic but want to know what the current solutions are/

tnx..

Don't know the PN. Went auto part store with old one and just match it.