AC # ? barth REGAL 1990 FORD 460 FILL

HI WE ARE IN PROGRESS OF FIXING OUR AC . WE WILL POST ALL THE DETAILS LATER BUT

DOES ANYONE KNOW THE " POUND OF REFILL NEEDED "

SO WE DONT HAVE TO GUESS

YES WE ARE GOING TO USE 134 R


IT WOULD BE A BIG HELP ..... OR WHERE IT IS LISTED JACK FINN

Modern Ford chassis and even Workhorse chassis both hold 2-lbs of R134a so I would start there and you should be very close.

If the refrigerant capacity sticker is still on the evaporator housing for R-12 then multiply that by.8 for the equivalent R134a capacity.

Don’t forget about PAG oil!

Good luck

THANKS FOLKS

I WILL STAR THERE

WHEN I GET V IT ALL DONE I WILL BOST ALL THE NEW 134
NUMBERS

IT CAN OUT FRON INSIDE , WE DID NOT HASVE TO PULL RADIATOR ...

THANKS AGAIN
.

just for peoples information .

we replace the compressor , ,belts , hoses , changed over to 134r etc with a very competent mechanic .. and he did what i requested of him

and all is in and working and it cools down the driver and front passenger just a little bit , just a little . all for $2500.00 .

maybe or maybe not i should of had a belt by passing the ac and purchase bags of ice when we travel in stead .

years ago in one of my first replies i stated if anyone buys one of these he should have a sock draw full of $100 bills that he has not counted , it was correct