Go to... | Start A New Topic | Search | Notify | Tools | Reply To This Topic |
My transmission temp gauge does not read. Where is the sensor to be found on the John Deere chasis? jamie 89 regal - john deere | |||
|
First Month Member 11/13 |
Is there 12 volts going to it? Is there a good ground? As for the sender, some folks install it in to a pressure test port on the drivers side of the Ford trans case. Or it could be in the pan, often as a plug. Or it could be in one of the lines to or from the tranny cooler up front. Some RVs have a tranny fluid filter installed on the line from the trans to the cooler, with the sender in the filter base. Look for a spin off filter. | |||
|
1/11 "5+ Years of Active Membership" |
I also had, what I thought was a transmission temp gauge that did not work, always reading at low point of scale. One day in traffic down south in July, the gage did go up, so I guess that with the transmission oil cooler and normal weather and driving conditions, the transmission stays cool. I never did look for sender after that. ------------------ 89 Barth Regal 32 Runs like a Deere New Hampshire | |||
|
First Month Member 11/13 |
Hey, Jamie, did you locate the sender? How did you fix the problem? We learn from each other here. | |||
|
i still have not fixed it. i will let you know. thanks. | ||||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |