Hi guys. Just got my first Barth; 92 '28 Breakaway Pusher w/ Cummins 5.9B. My mech needs the schematic and can't find it to repair its starting problem. Can anyone point me there? Thanks, stringmann

I can send you a copy for a 93 if that would help.

What is/is-not your rig doing. These things are prone to the constant power relay going bad and you can crank it all day but it won't start.

[This message has been edited by eric (edited April 04, 2005).]

Thanks; it is a constant relay problem according to my mech; and he said he looked for that schematic but couldn't find it. If you have one you can send, I would appreciate it. Thanks, Jerry

On mine it's located on the driver's side front compartment. It's the big relay on the lower right part of the panel. The parts costs about $35.00 In a pinch you can use a 4" piece of #10 wire between the bus bars and this will get you home. Email your address and I'll send you the wiring diagrams.