Barthmobile Portal
Breakaway Ignition switch?

This topic can be found at:
https://www.barthmobile.com/eve/forums/a/tpc/f/3631087061/m/3261008061

01-17-2003, 04:01 PM
Eric Herrle
Breakaway Ignition switch?
Has anyone out there had any problems with the ignition switch on a Breakaway? I had to replace the constant power relay last weekend but still have the intermittent problem of when I turn the key to on, nothing happens.
01-18-2003, 02:09 PM
SLOPEMASTER
I had a problem with my regal at the main disconnect by the step.Intermittent no power to ign switch,also by sure chassis battery is up to par.

------------------
01-20-2003, 04:24 AM
gupman
I thought I had a problem with my switch, but it turned out to be a problem with a relay in the electrical compartment.

Sometimes nothing would happen when I turned the switch on. It was an intermittent problem. I replaced the switch but it was still intermittent.

I went to NAPA and got a starter relay switch for an early 90's Dodge pickup with the cummins. Its been fine ever since. If I recall correctly, the new switch had 4 terminals, and I had to ground one of them,(on the Barth, the grounding bars are so handy).

I hope this helps.
02-05-2003, 08:47 AM
Eric Herrle
Thanks! the problem was exactly that! it's called a constant power relay. $42 later I was on my way. Thank you Barth for very detailed wiring diagrams!