Go to... | Start A New Topic | Search | Notify | Tools | Reply To This Topic |
I need to know how to replace hoses on top of the gas tank. the tank brackets are welded to the frame and I cannot get to I recently acquired this coach and am anxious to get it in top shape it is 100 percent original any help will be greatly appreciated | |||
|
Official Barth Junkie |
Welcome to the site. You have come to the right place! Give us a description of the coach and we'll get you some help if we can. My Barth is on a Chev chassis. Because of the tag axle the coach sits 8 inches above the frame. I can inspect, and with some difficulty, replace hoses, wires by reaching over the tank. If yours is a standard height, I believe you have to drop the tank. Mine has bottom straps which are held by long threaded rods hanging down from the frame. If yours have been welded you may have to cut the straps to remove the tank. Maybe someone else has had a similar problem. Again, good luck with your Barth! 9708-M0037-37MM-01 "98" Monarch 37 Spartan MM, 6 spd Allison Cummins 8.3 325+ hp | |||
|
2/16 Captain Doom |
Welcome to the Forums! Rusty "StaRV II" '94 28' Breakaway: MilSpec AMG 6.5L TD 230HP Nelson and Chester, not-spoiled Golden Retrievers Sometimes I think we're alone in the universe, and sometimes I think we're not. In either case the idea is quite staggering. - Arthur C. Clarke It was a woman who drove me to drink, and I've been searching thirty years to find her and thank her - W. C. Fields | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |