Go to... ![]() | Start A New Topic ![]() | Search ![]() | Notify ![]() | Tools ![]() | Reply To This Topic ![]() | ![]() |
![]() |
All, I am working on my Bendix cruise control and have narrowed the issues down to the pressure sensing switches for the cruise, not the module itself or actuator. Trouble is I can't locate where on the coach the air switch(es), it is supposed to have 2, are located. Any with a similar Regency know where on the coach the two air pressure sensing switches are located? I think if I can find them I can fix my prob's. All feedback appreciated. Thanks 1990 Regency 32 Center Aisle Spartan Chassis CTA8.3 Cummins 240HP 4 spd Allison 7.5 Diesel Genset Pac-brake Prosine 2000 Mickey's on the Rear Toyos front | ||
|
![]() ![]() |
one is about 1 1/2 in dia and 9" long with a 1/4 npt. thread on one end the other has a rod attached to the throttle.use soapy water to see if it leaks motor should be running some bubbles are of but not an inch just a little.then spray with wd 40 that is part of it. lenny lenny and judy 32', Regency, Cummins 8.3L, Spartan Chassis, 1992 Tag# 9112 0158 32RS 1B | |||
|
Powered by Social Strata |
![]() | Please Wait. Your request is being processed... |
|