I'm in the process of replacing the reefer, and will have miscellaneous parts available for the cost of postage (donated to Barthmobile.com):

- Control board (nearly new - with the old one which may be good)

- Crisper drawers

- Miscellaneous hardware: hinge posts, screw finishers, shelves, 120VAC heater, burner, etc.

Rusty, I'd be interested in the control board if it would work on my 983. Do you have a pn for it so I can check?

Thanks,

I'll get it tomorrow - it's in the bedroom of the Barth, and the old reefer is blocking the hallway.

You have several numbers to choose from:

1. Original board - 61647422
2. Replacement - Box marked 618661
3. Replacement's box also has handwritten 2131B (could be 2J31B) on it (possibly the dealer's part #)

Well, Dang It, those numbers don't fit my fridge. Only 600 and 6000 series, from what I can determine.

But, thank you, anyway, and I hope some other Barthmobiler can find a home for them.

Oh well. I think Norcold introduced several new control boards each "model year".

The old reefer is apart, and here are the parts available for a modest donation to Barthmobile.com:



At the top is the front control panel circuit board (P/N 61647322) and fascia.

Lower left is the control board #618661

Black box is the ignitor board (#61688922) and ignitor

The burner assy is lower right, no number.

Not shown is the 120VAC heating element #621072.

Also not shown are miscellaneous items like shelf clips, hinge parts, screw finishers, the plastic drawers, etc.

I'm bringing the lot to the DC GTG.

Rusty,
Do you still have some of these parts available? I also need the tin burner cover,little tin drain cup and door clasps.

Welcome to the forums!

I have the burner cover and the drain cup. The door latches (if that's what you refer to) were deteriorated - I had to repair them a couple of times, one of the reasons I replaced the whole unit when it failed.

PM your address after 12/07 (I won't have time to send them until after the FL GTG). Free (including shipping) with a donation to Barthmobile.com

Do you still have these parts for the 682 available. We could use them. Just need to know how to make a donation and about how much would be appropriate.
Thanks,

Welcome to the Forums!

All the parts are gone - sorry!